Technical depilatory

The galvanic electrolysis involves the insertion of a thin needle within the hair follicle. Use a constant current fed into the hair follicle by means of the needle, creating the formation of sodium hydroxide which, thanks to the action caustic, devitalises the bulb in 10-20 seconds. And causes destruction of the tissues at the root hair. It is an irreplaceable method in cases of distorted follicles. When finished, the hair, with his bulbous "electrocuted", is paraded with a simple pair of tweezers.

The thermolysis is carried out with a similar technique, but using an alternating current at high frequency that creates vibrations that develop heat. In this way the hair bulb directly coagulates under the action of heat thus developed, making the operation more comfortable and less painful. Compared to the prior art, it is considerably reduced application times of the current (from one to ten tenths of a second).

There is a third technique, defined mixed or blend, that takes advantage of both modes in an attempt to get a better result. In theory, therefore, it is more suitable for particularly hard and coarse hairs, such as those of men.

The method "flash" allows almost painless hair removal, but extremely effective and discharge times so short as to be almost as incorporated into the human body. It is a variant of the method Ago. Exploits an automatic control device and emits very short pulses of current to high intensity to enhance the effectiveness of the treatment, without any pain. The Super Flash 3 variant emits three quick pulses and is ideal for the most stubborn hairs.

Application

The insertion of the needle within the follicular ostium is a delicate operation which must be performed with caution and under light source (better with illuminated handle); if properly conducted is absolutely painless and safe. The needle, in fact, is actually a small probe that, if properly handled, it does not sting the skin but should simply be inserted into the follicle until the hair bulb, making it painless.

The choice of the most suitable technique is up to the operator, based on its experience, the area to be treated and the characteristics of the hair.
Elettrocagulazione electrolysis hair removal by http://www.my-personaltrainer.it/bellezza/elettrocoagulazione-peli.html
It is advisable to shave the hairs to be treated 3 or 4 days before the treatment, since the hair follicles that are in the resting phase (telogen) are more difficult to destroy than those that are growing (anagen).