Otzi Wireless Thumb Pen tattoo machine - 2 batteries

Wireless Pen tattoo

Otzi Wireless Thumb Pen tattoo machine - 2 batteries

Thread -free thread tattoo thumb pen, made with aeronautical aluminum and precision CNC technology.

Continuous Swiss engine with 4W capacity.

It is a Pen wireless tattoo, with batteries, also equipped with an interchangeable head with RCA connector to connect the pen also with the cable.


The Thumb Pen is a much more silent high -performance device and with less vibrations of conventional tattoo machines. It is equipped with only 3 buttons with which you can activate all the necessary functions.

The digital screen can show you:

- Pause. In standby mode, if it is not operated for a long time, it will turn off on its own

- working voltage

- battery status

- Work hours. Only the actual working time of the machine is counted. When the car is running, "flashes".

- prompt status

- insufficient power

- Method of protection

- overload protection and excessive heat.

Features:

Technical data:
- Appointment voltage from 5 to 11 V DC
- Power intake 4 W
- Jump Start 0.2 according to 9V - Start pulse
- Piercing frequency from 70 to 160 Hz
- AGO excursion from 0 to 4.5 mm
- battery holder with electrical connection wiring
- precision coreless engine
- Continuing operating mode
- diameter 32mm - 37mm
- Length 145 mm
- weight ca. 241g
Operating conditions:
- Environment temperature from -10 to 45 ° C
- relative humidity from 30 to 75%

CONTENT OF THE BOX: Thumb Pen, RCA adapter, 2 batteries, charger, reserve o-rings, instructions.


To ensure your work and a long duration of the machine, the Thumb Pen must be clean before and after each use using a soft cloth and its mechanism must be lubricated about 1 time per month.

Guarantee and assistance

Your tattooing machine has the 1 year of Italy guarantee from malfunctions, factory defects and problems relating to components not subject to usury. In addition, for any future problem, our laboratory and Italian technical support is always active and equipped with any spare, mechanical and non -mechanical.

Tips of use and maintenance of the Thumb Pen

With the exception of cartridges, which are disposable, all components of the machine, in principle, the grip must be cleaned and disinfected after use. Before starting any cleaning and maintenance activity on the thumb Pen, disconnect the power bolt of power supply

Unscrew the grip completely, clean it and immerse it in a sterilizing solution made up of peracetic acid and water or put it in the autoclave; Place the grip holding orings and then clean and disinfect the rest of the machine with a broad -spectrum disinfectant such as the Bactisan Spray 2000 or the Bactisan Wipe 2000 disinfectant wipes.

To ensure your work, the Thumb Pen must be clean before and after each use using a soft cloth and its mechanism must be fattened by about month.